Gelli Arts® Image Transfers 8" x 10" Selection

Contents

• Gelli Arts® Image Transfers 8" x 10" Selection

What could be more fun than learning to print and making your own image transfers!

This collection is made up of two exciting packs:

Siena & Vienna contains 32 images that you can transfer - 4 of each image.

Found Textures cotaines 30 images that you can transfer - 5 of each design.

Size - 8" x 10"

Image Transfer Instructions with Gelli Arts® Plate

1. 
   1. Prepare the plate - Place a pea-sized amount of black acrylic paint on your Gelli Arts® plate. Use a brayer (roller) to spread the paint into a thin, even layer. The paint should fully cover the plate and not be see-through.
   2. Apply the image - Carefully place your printable image face-down on the wet paint. Smooth gently with your fingers to remove air bubbles—do not press too hard.
   3. Lift the image - Peel up one corner to check if the image has transferred. Once ready, remove the image completely. Your design will now appear on the gel plate.
   4. Dry the image - Let the plate dry completely before the next step.
   5. Add the second color - Roll a thin, even layer of a contrasting acrylic paint over the dried image. You should still see the image faintly beneath the paint.
   6. Pull the print - Place a clean sheet of paper on top of the wet paint. Press firmly and evenly across the entire surface. Wait about 10 minutes for the paint to dry.
   7. Reveal your print - Slowly peel the paper off the plate. Your transferred image is now complete!

Note - you may use all kinds of acrylic paint on our gel plate - so grab your favourite colours and print till your hearts content!